All information products included in https://us-cert.cisa.gov/ics are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.
1. EXECUTIVE SUMMARY
- CVSS v3 8.3
- ATTENTION: Exploitable remotely
- Vendor: Mitsubishi Electric
- Equipment: Mitsubishi Electric, Factory Automation Engineering products
- Vulnerability: Unquoted Search Path or Element
2. UPDATE INFORMATION
This updated advisory is a follow-up to the advisory update titled ICSA-20-212-04 Mitsubishi Electric Factory Automation Engineering Products (Update F) that was published February 8, 2022, to the ICS webpage on cisa.gov/ics.
3. RISK EVALUATION
Successful exploitation of this vulnerability may allow an attacker to obtain unauthorized information, modify information, and cause a denial-of-service condition.
4. TECHNICAL DETAILS
4.1 AFFECTED PRODUCTS
The following products and versions are affected:
- C Controller Interface Module Utility, all versions
--------- Begin Update G Part 1 of 5 ---------
C Controller Module Setting and Monitoring Tool: All versions
--------- End Update G Part 1 of 5 ---------
- CC-Link IE Control Network Data Collector, Version 1.00A
- CC-Link IE Field Network Data Collector, Version 1.00A
- CC-Link IE TSN Data Collector, Version 1.00A
- CPU Module Logging Configuration Tool, Versions 1.100E and prior
- CW Configurator, Versions 1.010L and prior
- Data Transfer, Versions 3.42U and prior
- EZSocket, version 5.1 and prior
- FR Configurator SW3, all versions
--------- Begin Update G Part 2 of 5 ---------
- FR Configurator2: Versions 1.26C and prior
--------- End Update G Part 2 of 5 ---------
- GT Designer2 Classic, all versions
- GT Designer3 Version1 (GOT1000), Versions 1.241B and prior
- GT Designer3 Version1 (GOT2000), Versions 1.241B and prior
- GT SoftGOT1000 Version3, Versions 3.200J and prior
- GT SoftGOT2000 Version1, Versions 1.241B and prior
- GX Developer, Versions 8.504A and prior
- GX LogViewer, Versions 1.100E and prior
- GX Works2, Versions 1.601B and prior
- GX Works3, Versions 1.063R and prior
--------- Begin Update G Part 3 of 5 ---------
- M_CommDTM-IO-Link, Versions 1.03D and prior
--------- End Update G Part 3 of 5 ---------
- MELFA-Works: Version 4.4 and prior
- MELSEC WinCPU Setting Utility, all versions
- MELSOFT Complete Clean Up Tool, Versions 1.06G and prior
- MELSOFT EM Software Development Kit, all versions
- MELSOFT iQ AppPortal, 1.17T and prior
- MELSOFT Navigator, Versions 2.74C and prior
- MI Configurator, all versions
- Motion Control Setting, Versions 1.005F and prior
- Motorizer, Versions 1.005F and prior
- MR Configurator2, Version 1.125F and prior
- MT Works2, Version 1.167Z and prior
- MTConnect Data Collector, Version 18.104.22.168 and prior
- MX Component, Version 4.20W and prior
- MX MESInterface, Versions 1.21X and prior
- MX MESInterface-R, Versions 1.12N and prior
- MX Sheet, Version 2.15R and prior
--------- Begin Update G Part 4 of 5 ---------
- Network Interface Board CC IE Control Utility, Versions 1.29F and prior
- Network Interface Board CC IE Field Utility, Versions 1.16S and prior
- Network Interface Board CC-Link Ver.2 Utility, Versions 1.23Z and prior
- Network Interface Board MNETH Utility, Versions 34L and prior
--------- End Update G Part 4 of 5 ---------
- Position Board utility 2, all versions
- PX Developer, version 1.53F and prior
- RT ToolBox2: Version 3.73B and prior
- RT ToolBox3: Version 1.82L and prior
--------- Begin Update G Part 5 of 5 ---------
- Setting/monitoring tools for the C Controller module (SW3PVC-CCPU), all versions
- Setting/monitoring tools for the C Controller module (SW4PVC-CCPU), all versions
--------- End Update G Part 5 of 5 ---------
- SLMP Data Collector, Version 1.04E and prior
4.2 VULNERABILITY OVERVIEW
Multiple Mitsubishi Electric Factory Automation engineering software products have a malicious code execution vulnerability. A malicious attacker could use this vulnerability to obtain information, modify information, and cause a denial-of-service condition.
- CRITICAL INFRASTRUCTURE SECTORS: Critical Manufacturing
- COUNTRIES/AREAS DEPLOYED: Worldwide
- COMPANY HEADQUARTERS LOCATION: Japan
Mashav Sapir of Claroty reported this vulnerability to CISA.
Mitsubishi Electric recommends the following mitigations:
Please refer to the Mitsubishi Electric website for details on available patches.
Download the latest version of each software product and update it.
Refer to the manual for help to update affected products.
For users of a product that has not released a fixed version or who cannot immediately update the product, Mitsubishi Electric recommends taking the following mitigation measures to minimize risk:
- If a “File Name Warning” message is displayed when starting Windows, take appropriate measures according to the instructions in the message (such as changing a file name) and then install or operate the products.
- Operate the products under an account that does not have administrator privileges.
- Install an antivirus software in computers using the products.
- Restrict network exposure for all control system devices or systems to the minimum necessary and ensure they are not accessible from untrusted networks and hosts.
- Locate control system networks and remote devices behind firewalls and isolate them from the network.
- Use virtual private network (VPN) when remote access is required.
Additional information about the vulnerabilities or Mitsubishi Electric's compensating control is available by contacting a Mitsubishi Electric representative.
CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Additional mitigation guidance and recommended practices are publicly available on the ICS webpage on cisa.gov in the Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to CISA for tracking and correlation against other incidents.
CISA also recommends users take the following measures to protect themselves from social engineering attacks:
- Do not click web links or open unsolicited attachments in email messages.
- Refer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
- Refer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
No known public exploits specifically target this vulnerability. This vulnerability has a high attack complexity.
For any questions related to this report, please contact the CISA at:
Toll Free: 1-888-282-0870
CISA continuously strives to improve its products and services. You can help by choosing one of the links below to provide feedback about this product.
Please share your thoughts.
We recently updated our anonymous product survey; we'd welcome your feedback.